00137991, Version 1.0
26/32
OPERATION
After connecting the device to the mains it is ready for operation. The display indicates the last operating
mode. The operating modes can be selected by means of the display and the control buttons. All settings
remain stored even if the device is disconnected from the mains. The device can be operated in stand-alone
mode via the control board and the EUROLITE IR-7 remote control or in DMX-controlled mode via any
commercial DMX controller as well as wireless via QuickDMX with the optional available EUROLITE
QuickDMX USB Wireless Transmitter/Receiver.
Menu structure
Mode
Display
Function
DMX mode
DMX
3CH
d001-512
3-channel mode and start address
2CH
d001-512
2-channel mode and start address
1CH
d001-512
1-channel mode and start address
Brightness
BRIGHTNE
01-10
Constant lighting of the set
brightness
Sound control
SOUND
SOUND
Sound program
Running speed in
automatic and sound-
controlled mode
SPEED
01-09
Program running speed
slow > fast
Microphone sensitivity for
sound control
SENSITIV
01-09
Microphone sensitivity
low > high
White color setting
COLOR
W:000-255
White 0-100%
Dimmer
DIMMING
001-100
Total brightness
dark > bright
Strobe effect
FLASH
000-100
Strobe effect
slow > fast
Sound control silent scene
SILENT
on
LEDs off if there is no music signal
oFF
LEDs remain on if there is no music
signal
Behavior in case of
missing DMX signal
DMX LOST
Blackout
LEDs switched off
Hold
Most recent DMX value is held
Full
All LEDs light at 100% brightness
Brightne
Last selected brightness (01-10)
Slave mode
SLAVE
Slave
Slave mode
Potentiometer
POTENTIO
on
Switching on the manual rotary
control
oFF
Switching off the manual rotary
control
PWM frequency (pulse-
width modulation)
PWM freq
900-25kHz
PWM frequency (pulse-width
modulation)
Firmware version
Version
Vx.x
Firmware version number
