EuroLite LED ML-56 COB RGBAWUV, Руководство пользователя

Страница: 22 / 28

00117701.DOCX, Version 1.0 22/28
RGBW ON/OFF Use or nonuse of the white balance values of CAL2
POW HIGH/NORM Power limitation (HIGH:100 %, NORM: 33%)
DIM
OFF
Dimmer speed (step response)
Off : Response characteristics of LEDs
DIM 1: Response characteristics of halogen lamps,
fast
DIM 2: Response characteristics of halogen lamps,
middle
DIM 3: Response characteristics of halogen lamps,
slow
DIM 4: Response characteristics of halogen lamps,
very slow
DIM1
DIM2
DIM3
DIM4
CAL1
WT.01-
WT.11
R.000 (000-255)
Color presets
With this function you can make 11 color preset
settings (WT.01-WT.11), which can be called up via
DMX.
G.000 (000-255)
B.000 (000-255)
Y.000 (000-255)
W.000 (000-255)
U.000 (000-255)
CAL2 RGBW
R.000 (025-255)
White balance (s. SET - RGBW)
G.000 (025-255)
B.000 (025-255)
SLED SL00-SL20
Color presets SMD ring
SL00 No function
SL01 Red
SL02 Green
SL03 Blue
SL04 Red + green
SL05 Green + blue
SL06 Red + blue
SL07 Red + green + blue
SL08 Different color mix effect
SL09 Color change effect 1
SL10 Color change effect 2
SL11 Color change effect 3
SL12 Color change effect 4
SL13 Color change effect 5
SL14 Color change effect 6
SL15 Color change effect 7
SL16 Color change effect 8
SL17 Color change effect 9
SL18 Color change effect 10
SL19 Color change effect 11
SL20 Color change effect 12
Interconnecting several devices (master/slave operation)
Several devices may be interconnected (max. 32). Then all slave units can be synchronized and controlled
with the master unit without the need for a DMX controller. The devices must be set to the corresponding
operating modes.
1 Configure all slave units before connecting the master unit: Press the MENU button so many times until
RUN is indicated on the display. Confirm with the ENTER button. Press the MENU button until SLAV is
indicated on the display. Confirm with the ENTER button.
2 Connect the DMX output of the master unit to the DMX input of the first slave unit. Then connect the
DMX output of the first slave unit to the DMX input of the second slave unit, etc. until all units have been
connected in a chain. Make sure the master unit is the first in the chain. Do not connect a DMX controller
to the DMX input of the master unit.
3 Set the master unit to the desired operating mode. The interconnected devices will now operate
synchronously.