00129744, Version 1.0
36/48
Interconnecting several devices (master/slave operation)
Several devices may be interconnected (max. 32). Then all slave units can be synchronized and controlled
with the master unit without the need for a DMX controller. The devices must be set to the corresponding
operating modes.
Slave units
Configure all slave units before connecting the master unit.
1 Press the
MENU
button so many times until
SLA
is indicated in the display. Confirm with the
ENTER
button. The display now indicates
SLAV
and flashes.
2 Confirm with ENTER. The display will continue to flash until control signals are being received from the
master unit.
3 Connect the DMX output of the master unit to the DMX input of the first slave unit. Then connect the
DMX output of the first slave unit to the DMX input of the second slave unit, etc. until all units have been
connected in a chain. Make sure the master unit is the first in the chain. Do not connect a DMX controller
to the DMX input of the master unit.
Master unit
Select the desired show program (automatic mode or sound-controlled mode). The interconnected light sets
will now operate synchronously.
Operation with the foot switch
The optional wireless foot switch allows convenient control of the light set over a distance of up to 30 meters
(line-of-sight). The foot switch will only work in stand-alone mode, it will not work in DMX or slave mode. The
foot switch provides quick access to the show programs in automatic mode or sound control mode and the
color mode with preset colors.
1
Insert the 9 V battery provided into the battery compartment at the bottom. Then switch on the foot
switch with the rear on/off switch. The POWER indicator at the top will light up. When pressing a pedal,
the
TRANSMITTER
indicator will light up for confirmation.
2
Press pedal
AUTO
repeatedly to switch between the show programs in automatic mode. They will be
indicated in the display.
3
Press pedal
MUSIC
repeatedly to switch between the show programs in sound-controlled mode. They
will be indicated in the display.
4
Press pedal
COLOR
to select the preset colors for color mode. The spots will constantly emit the color
adjusted.
5
Press pedal
BLACKOUT
to switch off the LEDs. Press the pedal again to turn the LEDs back on.
6
The foot switch can be deactivated in the system settings under the menu item
SYS
>
W-En.
After use,
switch off the foot switch in order to save the battery.
COLOR
AUTO
MUSIC
BLACKOUT
POWER
TRANSMITTER
