00129744, Version 1.0
35/48
Stand Alone Operation
Automatic mode
In automatic mode, 26 show programs are available that run at an adjustable speed.
1 Press the
MENU
button so many times until
Aut
is indicated in the display. Confirm with the
ENTER
button.
2 Use the buttons
UP
and
DOWN
to select the desired show program.
AutP
=
Mushrooms
and spots,
AutL
= Laser,
AutF
= Strobe LEDs or
AutM
for a combination of all devices. Confirm with the
ENTER
button.
3 Adjust the number of the desired program with the buttons
UP
and
DOWN
.
4 Confirm with
ENTER
. The display indicates the menu item running speed.
5 Adjust the running speed from S.01 (slow) to S.99 (fast) with the buttons
UP
and
DOWN
.
6 Confirm with
ENTER
. The display indicates the menu item rotation of the
mushrooms
.
7 Adjust the rotation from M.00 (slow) to M.99 (fast) with the buttons
UP
and
DOWN
.
8 Confirm with
ENTER
.
Sound control
Via the integrated microphone the unit can perfectly reproduce the show programs to the rhythm of the
music (sufficient bass provided).
1 Press the
MENU
button so many times until
Sou
is indicated in the display. Confirm with the
ENTER
button.
2 Use the buttons
UP
and
DOWN
to select the desired show program.
SouP
=
Mushrooms
and Spots,
SouL
= Laser,
SouF
= Strobe LEDs or
SouM
for a combination of all devices. Confirm with the
ENTER
button.
3 Use the buttons UP and DOWN to adjust the number of the desired program. Confirm with
ENTER
.
4 Adjust the microphone sensitivity with the control
SENSITIVITY
. The LEDs and laser are switched off
after 5 seconds if the volume is too low or if there is no sufficient bass beat.
Individual color mix
In the color mode
CoLo
the UV strobe LEDs are switched off and the m
ushrooms
and the spots light
constantly in red, green, blue and white. It is possible to adjust the flash frequency of the strobe LEDs and
the brightness of the spots.
1 Press the
MENU
so many times until
CoL
is indicated in the display. Confirm with the
ENTER
button.
The display now indicates
CoLo
.
2 Press the
ENTER
button. Now the display indicates the letter
R
for the color and the corresponding
brightness value.
3 Use the buttons
UP
and
DOWN
to adjust the desired brightness.
4 Confirm with the
ENTER
button. Now the color green can be adjusted; then blue and white.
5 The settings for the m
ushrooms
and spots are the last menu item. Use the buttons
UP
and
DOWN
to
adjust the flash frequency from S.01 (slow) to S.99 (fast).