00066535.DOC, Version 1.0
23/24
Channel 7 - Chaser 2
Value:
Function:
001 - 255
LED Chaser from up to down
Channel 8 – Internal Programs, Sound Control
Value:
Function:
000 – 005
No function
006 – 039
Program 1
040 – 069
Program 2
070 – 099
Program 3
100 – 129
Program 4
130 – 159
Program 5
160 – 189
Program 6
190 – 219
Program 7
220 – 249
Program 8
250 – 255
Sound Control
Channel 9 - Speed
Value:
Function:
000 - 255
Increasing speed of the program settings
under
channel 8
(006 - 249)
Channel 10 – Strobe
Value:
Function:
000 – 010
No function
011 - 128
Master strobe, with increasing speed
129 - 255
Chasing strobe, with increasing speed
CLEANING AND MAINTENANCE
The operator has to make sure that safety-relating and machine-technical installations are inspected by an
expert after every four years in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are inspected by a
skilled person once a year.
The following points have to be considered during the inspection:
1) All screws used for installing the devices or parts of the device have to be tightly connected and must not
be corroded.
2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,
trussing).
3) The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or
sediments. Further instructions depending on the installation spot and usage have to be adhered by a
skilled installer and any safety problems have to be removed.
Disconnect from mains before starting maintenance operation!
DANGER TO LIFE!
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no serviceable parts inside the device except for the fuse. Maintenance and service operations are
only to be carried out by authorized dealers.
