00117205.DOCX, Version 1.1
18/24
Power supply of further devices
The jack POWER OUT allows for power supply of further devices. To interconnect several devices, connect
the jack POWER OUT to the input POWER IN of the next unit until all units are connected. Matching power
cables with IEC plugs are available as accessories. In this manner, up to 8 devices can be linked at 230/240
input voltage and up to 4 devices at 110/115 input voltage.
OPERATION
After connecting the device to the mains it is ready for operation. The display indicates the last operating
mode. The operating modes can be selected by means of the display and the control buttons. All settings
remain stored even if the device is disconnected from the mains. The device can be operated in stand-alone
mode via the control board or in DMX-controlled mode via any commercial DMX controller.
Stand-alone mode
In the stand-alone mode, you can do without a controller. Disconnect the device from the controller and call
the desired setting. Please refer to the instructions under Control Board.
Control Board
The Control Board offers several features: you can simply set the starting address, run the pre-programmed
program or select a DMX channel mode.
Browse through the menu by pressing Menu. You can change the
selection by pressing Up or Down. Press Enter in order to confirm. You
can leave every mode by pressing Menu. The functions provided are
listed in the following sections.
No
Main
Menu
Menu level 2
Description
1
d.8-
d001
Setting 8 channel mode
DMX address setting
2
d.5--
d001
Setting 5 channel mode
DMX address setting
3
r---
r000-r255
Dimmer intensity of red LED color
000 – 255 (increasing)
4
g---
g000-g255
Dimmer intensity of green LED color
000 – 255 (increasing)
5
b---
b000-b255
Dimmer intensity of blue LED color
000 – 255 (increasing)
6
F---
F000-F255
Strobing colors (color setting via menu
r---. g--- and b---)
(with increasing speed)
7
C---
C000-C255
Fading colors
(with increasing speed)
8
J---
J000-J255
Switching colors
(with increasing speed)
9
S---
S000-S255
Sound controlled mode
(with increasing sensitivity)
10
dr--
dr-0: Response characteristics of LEDs
dr-1: Response characteristics of
halogen lamps, very fast
dr-2: Response characteristics of
halogen lamps, fast
dr-3: Response characteristics of
halogen lamps, middle
dr-4: Response characteristics of
halogen lamps, slow
Dimmer speed (step response)
