EuroLite AKKU UP-1 QCL, Руководство пользователя

Страница: 33 / 44

00100653.DOC, Version 1.0 33/44
OPERATION
Switch on the device with the power switch. The unit requires a short initialization process and is then ready
for operation.
The LED display lights up and you can choose the desired mode via the buttons MENU, ENTER, UP and
DOWN.
The device has two operating modes. It can be operated in stand-alone mode via the control board and the
EUROLITE IR-13 remote control or in DMX-controlled mode via a standard DMX controller and wireless via
QuickDMX with suitable wireless transmitter.
In the stand-alone mode, the device can be used without controller. You can do without a controller
as the device features a built-in microphone.
You can adjust the sensitivity with the rotary-control on the bottom of the device.
Disconnect the device from the controller and select the desired mode.
Please refer to the instructions under Control Board.
Control Board
The Control Board offers several features: you can simply set the starting address, run the pre-programmed
program or select a DMX channel mode.
The main menu is accessed by pressing Menu. Browse through the menu by
pressing Up or Down. Press Enter in order to select the desired menu. You
can change the selection by pressing Up or Down. Press Enter in order to
confirm. You can leave every mode by pressing Menu. The functions
provided are listed in the following sections.
Menu level 1 Menu level 2 Description
Addr d001-d512 DMX address setting
CHnd
3CH, 4CH,
6CH, 8CH,
10CH
Setting DMX channel mode
SLAU SL.AU Slave Mode
SP-- SP00-SP99
Select the desired program speed
S00 – S99 (increasing)
MENU UP DOWN ENTER