00077886.DOC, Version 1.1
21/31
DESCRIPTION OF THE DEVICE
Controller for EUROLITE LED Pixel Tube 360
• Controller and power supply unit for 4 LED light tubes
• Suitable for 51928790 EUROLITE LED PIXEL Tube 360° clear 1 m, 51928792 EUROLITE LED Pixel Tube
360° clear 0.5 m or 51928793 EUROLITE LED Pixel Tube 360° clear 1.5 m (not included in the delivery)
• Functions: Static colors, RGBW color blend, internal programs, dimmer, strobe, sound-control, sensitivity
adjustable
• Further display settings: display on or off, display inverted, default settings
• Operable in stand-alone mode or via DMX
• Master/Slave for parallel operation of several devices
• Comfortable addressing and setting via control panel with 4-digit LED screen and four operating buttons
• DMX512 control via regular DMX-controller
• Number of DMX channels (5, 7, 14, 84, 192, 312) selectable for numerous applications
• Ready for connection via included IEC power cord with safety plug
• Feed-through output allows to power up to 8 devices
INSTALLATION
Install the controller on a plane surface or mount in the trussing. Install the LED tubes at the desired
installation spot using their eyelets or an appropriate installation material. Connect the tubes with the
controller outputs. Each output connects one LED tube. You can use appropriate extension cords until 100
m.
Overhead rigging
The installation of the device has to be built and constructed in a way that it can hold 10 times the weight for
1 hour without any harming deformation.
The installation must always be secured with a secondary safety attachment, e.g. an appropriate catch net.
This secondary safety attachment must be constructed in a way that no part of the installation can fall down
if the main attachment fails.
When rigging, derigging or servicing the device staying in the area below the installation place, on bridges,
under high working places and other endangered areas is forbidden.
The operator has to make sure that safety-relating and machine-technical installations are approved by an
expert before taking into operation for the first time and after changes before taking into operation another
time.
The operator has to make sure that safety-relating and machine-technical installations are approved by an
expert after every four year in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are approved by a
skilled person once a year.
Procedure:
The device should be installed outside areas where persons may walk by or be seated.
IMPORTANT! OVERHEAD RIGGING REQUIRES EXTENSIVE EXPERIENCE, including (but not limited to)
calculating working load limits, installation material being used, and periodic safety inspection of all
installation material and the device. If you lack these qualifications, do not attempt the installation yourself,
