00121152.DOCX, Version 1.0
27/32
Dimming Curves options:
Linear
Remote control IR-32
The device must be activated for use via the remote control. For this, set menu item
IR REMOTE
to
yes
.
When actuating a button, always direct the remote control towards the sensor. There must be no obstacles
between remote control and the sensor.
Button
Function
ON
Turns the IR-32 on
OFF
Turns the IR-32 off
FLASH
Press and hold for strobe effect; release to stop
STROBE
Continuous strobe effect
FADE
Color fades in and out
SMOOTH
Smooth color change
R G B W
Color mode; select colors with R/G/B/W; W is the
halogen lamp
12 color buttons
Press any button to display the corresponding color.
4 dim buttons
4-level dimmer
SETUP
Running speed (+)
CANCEL
Running speed (-)
SETUP + R G B
Own color mixtures
*
*
For example:
R
+
SETUP +
G
= Color mixture of R + G.
Notes:
•
The remote control is supplied with a battery inserted. An insulating foil between the battery and the battery
contacts prevents the battery from being discharged during storage. Prior to the first operation remove the
foil from the battery support on the rear side of the remote control. Otherwise operation of the remote
control is not possible.
•
If the range of the remote control decreases, replace the battery. For this purpose,
on the rear side of the remote control press the small bar with the groove to the
right and at the same time remove the battery support. For operation, one 3 V
button cell type CR 2025 is required. When inserting, pay attention that the
positive pole of the button cell shows upwards in the support.
•
Remove the battery from the remote control as a precaution if the device is not used for a longer period of
time.
