background image

© EUROHEAT DISTRIBUTORS (H.B.S) LTD. July 2011

 

 Instructions Part Number IN1231 Ed 1

30

CE Declaration of Conformity

We, SHT Heiztechnik aus Salzburg GmbH, A-5101 Salzburg-Bergheim, Rechtes Salzachufer 40, hereby declare 
that the boilers supplied by us, model series EEVVOO AAQQUUAA,with 9 kW and 15 kW outputs, comply with 
the provisions of the Machinery Safety Directive (MSV, BGBl. No. 306/1994) and therefore with the Machinery 
Directive 2006/42/EC implemented by the above, the EMC Directive 89/336/EC and Directive 2004/108/EC, 
the Low Voltage Directive 2006/95/EC, as well as the relevant technical safety regulations.

The  production  process  is  subjected  to  an  ongoing  appropriate  quality  control  programme  and  is  certified 
periodically by an accredited, authorised test institution. The boiler models comply with the legal requirements 
and relevant standards for marketing according to Art. 15a BVG (on the basis of EN 303-5).

In this respect the boiler models undergo type testing at one or more accredited and authorised test centres.
The original test certificates are held by the manufacturer.

The conformity of the designated products with the above-mentioned directives is demonstrated by compliance 
with the following standards by way of example:

ÖNORM M7550, ÖNORM M 7510/1, ÖNORM M 7510/2, ÖNORM B8130, ÖNORM B8131, ÖNORM B8133,
DIN 4751 Part 1, DIN 4751 Part 2, DIN 4751 Part 4, DIN 1988, ÖNORM EN 303-5, EN 60335/VDE 0700 Part 
1/12.91 and VDE 0722/4.83

Originator:    

 

 

Dipl. Ing. Thomas Bauer 

 

 

Dipl. Ing. Harald Berger

 

 

 

 

 

HET Development Manager   

 

SHT Technical Manager

Legally binding signature:

Place, Date:   

 

 

 

 

 

 

 

        Salzburg-Bergheim, 27.02.2009

Содержание EVO Aqua

































Отзывы: