❐
Do not use the cord for purposes other than the intended one such as for carrying
the electric tool, hanging it up or for pulling the plug out of the socket. Keep the
cord away from heat, oil, sharp edges or moving parts of the device. Keep the cord
away from the cutting area.
❐
If you are working with an electric tool outdoors, only use extension cords, which
are also suitable for outdoor use.
❐
If working with the electric tool in a moist environment cannot be avoided, use a
fault-current circuit breaker.
Personal safety
❐
Keep children away from the packaging materials. There is a danger of suffocation!
❐
Be careful, pay attention to what you are doing, and work sensibly with the electri-
cal tool. Do not use the electrical tool if you are tired or under the in
fl
uence of
drugs, alcohol, or medication.
❐
Do not work above eye level.
❐
Pay attention to a suf
fi
cient safety distance.
❐
Wear non-slipping, resistant work gloves that help you hold the handles securely.
❐
Wear as / in addition to personal safety equipment always safety goggles as well as
a mask and hearing protection.
❐
Avoid accidental start-ups. Make sure the electrical tool is switched off before you
connect it to the power supply and/or battery and before you pick it up or carry it.
❐
Avoid an abnormal posture. Make sure you are standing stably and keep your bal-
ance at all times.
❐
Wear suitable clothing: long pants, long-sleeved shirt, and sturdy shoes with non-
slipping soles. Do not wear clothing that is too wide or short or jewellery. Keep
hair, clothing, and gloves away from moving parts.
❐
If dust extraction and collection equipment can be mounted, make sure that they
are connected and used properly.
❐
Keep all body parts away from the cutting blades. Do not try to remove cuttings
or hold onto the material being cut while the blades are running. Remove jammed
cuttings only when the appliance is shut off.
❐
Carry the device by the handle when the blades are at a standstill.
❐
Wait until the electrical tool has come to a standstill before putting it down.
❐
Heavy protective clothing can lead to fast tiring and possibly to a heatstroke. Per-
form heavy work in the early morning or later evening hours when the tempera-
ture is not as high.
❐
Familiarise yourself with the appliance before
fi
rst use. Especially make sure you
know how to switch it off.
❐
Keep all body parts away from the cutting head during activation.
❐
The speci
fi
ed vibration emission value limits the working hours. If you notice a
tingling or discolouration (white) of the
fi
ngers then stop working with the tool.
❐
Warning:
The actual value of existing vibration emissions while using the machine
may differ from those in the manual respectively by the manufacturer. This can be
caused by the following factors to be considered before or during any of use:
-
Is the machine used correctly?
-
Is the method of cutting the material and how it is processed correctly?
-
Is the state of use of the machine in the regulatory?
-
Sharpness condition of cutting tool and proper cutting tool?
-
Are the grips
fi
rmly mounted on the machine body?
02070_DE-GB-FR-NL_V1.indb 14
15.02.10 14:10
13
