Pag. 16
closed
maximum fl ame
minimum fl ame
lighting / pilot light
LIGHTING BURNERS
- Open main gas tap upstream of appliance.
- Press knob and turn from “
closed
” position to “
light/pilot light”
position
and at the same time press the
piezoelectric button until the pilot light comes on. Simply open the door to check on the pilot burner.
When fi rst starting up, in order to keep the pilot light ON, keep the knob pressed for about 10 seconds. When
it is released, the pilot light should remain lighted, otherwise, repeat the operation.
- To switch on the main pilot light, turn the gas knob from the “
light/pilot light”
position
to the
“
maximum fl a-
me”
position and then turn the knob to the
“
minimum fl ame”
position to set a slower and more economical
cooking procedure, if required.
SWITCH-OFF
- To switch off the main burner and then the pilot light, turn the gas knob to “
light/pilot light”
and then to
“clo-
sed”
.
- At the end of the working day, switch off the gas check valve upstream of the appliance.
- Shut off the water stopcock upstream of the appliance.
The control knobs (Fig. 12) of the burner taps have four positions:
DRAINING OFF THE WATER
To drain off the water from the tank, open the
tap (Fig. 13, ref. 1) inside the door. The water
will automatically run out of the appliance and
fl ow into the discharge pipe through an open
trap. If necessary, place a metal bowl under-
neath the appliance that is capable of holding
all the water from the tank.
Fig. 12
Fig. 13
