Bef
or
e U
se
10
Before Use
C. ATTACH MICROFIBER PAD TO STEAM CLEANER
WARNINGS!
To prevent floor damage, ALWAYS attach either the
Microfiber Pad or the Carpet Glider with Carpet Pad when using
your Steam Cleaner.
NEVER USE WITHOUT EITHER OF THESE
ATTACHMENTS AFFIXED TO THE STEAM CLEANER.
ATTACHING MICROFIBER FLOOR PAD
MICROFIBER FLOOR PAD
– Place Microfiber Floor Pad
face down on the floor, wide side forward. Hold Steam
Cleaner about 2” above Pad and gently place Steam
Cleaner on the Pad. Firmly press down to assure
Pad is adhered to the Steam Cleaner.
The metal heat plate on bottom (
A
) provides extra heat
to the floor pad to soften and remove dirt.
USE ON HARDWOOD FLOORS
– For hardwood floors, use only
on “sealed” hardwood surfaces. Move Steam Cleaner forward
and backward while cleaning, carefully observing the amount of
steam used, as too much water could cause damage.
ATTACHING CARPET GLIDER WITH CARPET PAD
Place Carpet Glider face up on floor. Center and place
Carpet Pad on top of Carpet Glider. Hold Steam Cleaner
over Carpet Glider and gently lower the Steam Cleaner
onto the Glider. Make sure the 4 clips on Glider are
around the outside of the Steam Cleaner Base and using
hands, attach the 4 clips of the Carpet Glider to the Base.
Steam can cause wax to be stripped from floor and consequently damage
some varieties of linoleum flooring. ALWAYS test a small, inconspicuous
portion of the floor BEFORE using steam to ensure that your linoleum floor
does not have this issue. For some varieties of linoleum or vinyl floors the
floor Steam Cleaner is harder to push forward and back.
NOTE: See “Maintenance & Cleaning” for care and cleaning instructions of
Microfiber Pads (see pg. 16).
*
IMPORTANT NOTE ABOUT LINOLEUM FLOORING *
A -
Heat Plate
on
bottom of Base
provides additional
cleaning boost.
A -
Heat Plate on
bottom of Base
boosts the cleaning
performance.
7
Before Use
ATTACHING CARPET GLIDE WITH CARPET PAD
place Carpet Pad on top of Carpet Glide. Hold
Floor Steamer over Carpet Glide and gently lower
the Steamer onto the Glide. Make sure the 4 clips
on Glide are around the outside of the Steamer
Base and using hands, attach the 4 clips of the
Carpet Glide to the Steamer Base.
USE ON HARDWOOD FLOORS –
For hardwood
Move Steamer forward and backward while
cleaning, carefully observing the amount of
steam used, as too much water could cause
damage.
Be
fo
re
U
se
C. Attach Cleaning Pads to Steamer
WARNING:
Scrubbing Floor Pad or the Carpet Glide Accessory with Carpet Pad
when using your Floor Steamer. NEVER USE WITHOUT EITHER OF THESE
ATTACHMENTS AFFIXED TO THE MACHINE.
ATTACHING SCRUBBING FLOOR PAD
Scrubbing Floor Pad –
Place Scrubbing Floor Pad
center Scrub Strip facing down (and positioned to
match metal heat plate on bottom of Base-see
“A”)
. .
Hold Floor Steamer about 2” above Pad and gently
place Floor Steamer on the Pad. Firmly press down
to assure Pad is adhered to the Floor Steamer.
A -
Heat Plate
on
bottom of Base
provides additional
cleaning boost.
NOTE: See “Maintenance & Cleaning” for care and cleaning instructions for
IMPORTANT NOTE ABOUT LINOLEUM FLOORING
Steam can cause wax to be stripped from, and consequently damage, some
For some varieties of linoleum or vinyl floors the floor steamer is harder to push
forward and back.
7
Before Use
ATTACHING CARPET GLIDE WITH CARPET PAD
place Carpet Pad on top of Carpet Glide. Hold
Floor Steamer over Carpet Glide and gently lower
the Steamer onto the Glide. Make sure the 4 clips
on Glide are around the outside of the Steamer
Base and using hands, attach the 4 clips of the
Carpet Glide to the Steamer Base.
USE ON HARDWOOD FLOORS –
For hardwood
Move Steamer forward and backward while
cleaning, carefully observing the amount of
steam used, as too much water could cause
damage.
Be
fo
re
U
se
C. Attach Cleaning Pads to Steamer
WARNING:
Scrubbing Floor Pad or the Carpet Glide Accessory with Carpet Pad
when using your Floor Steamer. NEVER USE WITHOUT EITHER OF THESE
ATTACHMENTS AFFIXED TO THE MACHINE.
ATTACHING SCRUBBING FLOOR PAD
Scrubbing Floor Pad –
Place Scrubbing Floor Pad
center Scrub Strip facing down (and positioned to
match metal heat plate on bottom of Base-see
“A”)
. .
Hold Floor Steamer about 2” above Pad and gently
place Floor Steamer on the Pad. Firmly press down
to assure Pad is adhered to the Floor Steamer.
A -
Heat Plate
on
bottom of Base
provides additional
cleaning boost.
NOTE: See “Maintenance & Cleaning” for care and cleaning instructions for
IMPORTANT NOTE ABOUT LINOLEUM FLOORING
Steam can cause wax to be stripped from, and consequently damage, some
For some varieties of linoleum or vinyl floors the floor steamer is harder to push
forward and back.
