Bef
or
e U
se
8
Before Use
1
ASSEMBLY OF PARTS & PREPARATION OF STEAM CLEANER
Make sure all parts are in the box (see pg 6).
IMPORTANT:
FOLLOW THESE INSTRUCTIONS CAREFULLY!
A. ASSEMBLE HANDLE
After removing Handle Assembly from carton:
• Pull Extension Tube apart until you see the lock opening
(hole) on the Tube.
Be
fo
re Us
e
5
Before Use
Assembly of Parts & Preparation of Steamer
Make sure all parts are in the box (see pg 4).
IMPORTANT:
FOLLOW THESE INSTRUCTIONS CAREFULLY!
1
*IMPORTANT*
Frontal steam can only be generated when Extension Tube is in the
“Maximum Extension” position.
BE SURE EXTENSION TUBE IS FULLY
EXTENDED AND LOCKED IN PLACE FOR OPTIMAL STEAM OPERATION.
“Maximum Extension” Position
3. Snap the Locking Clamp closed, to
lock the Extension Tube in position.
Pull apart Extension Tube
A. Assemble Handle
After removing Handle Assembly from carton:
1. Pull Extension Tube apart until you see the lock opening
(hole) on the Tube.
2. Line up the peg on Locking Clamp with the
hole on Extension Tube and...
Pull apart Extension Tube
Line up the peg on Locking Clamp with the
hole on Extension Tube and...
snap the Locking Clamp closed, to lock
the Extension Tube in position.
“Maximum Extension” Position
Front steam jets will only operate when Extension Tube is in the “Maximum
Extension” position.
BE SURE EXTENSION TUBE IS FULLY EXTENDED
AND LOCKED IN PLACE FOR OPTIMAL STEAM OPERATION.
Do not
remove Handle Assembly once attached to steam cleaner.
*
IMPORTANT
*
