EUROCOM Notebook V12.3.10 Скачать руководство пользователя страница 8

Страница: 8 / 296

Preface

Instructions for Care and Operation

The notebook computer is quite rugged, but it can be damaged. To prevent this, follow these suggestions:

Don’t drop it, or expose it to shock.

If the computer falls, the case and the components could be damaged.

Keep it dry, and don’t overheat it.

Keep the computer and power supply away from any kind of heating ele-

ment. This is an electrical appliance. If water or any other liquid gets into it, the computer could be badly dam-
aged.

Do not expose the computer
to any shock or vibration.

Do not place it on an unstable
surface.

Do not place anything heavy
on the computer.

Do not expose it to excessive

heat or direct sunlight.

Do not leave it in a place where

foreign matter or moisture may

affect the system.

Don’t use or store the computer

in a humid environment.

Do not place the computer on

any surface that will block the

Vents/Fan Intakes.

Содержание Notebook V12.3.10









































































































































































































































































































Результаты поиска

Содержание Notebook V12.3.10

Отзывы:

Похожие инструкции для Notebook V12.3.10

Бренды по названию

Популярные бренды

EUROCOM Notebook V12.3.10, Руководство пользователя

Результаты поиска

Содержание Notebook V12.3.10

Отзывы:

Похожие инструкции для Notebook V12.3.10

Бренды по названию

Популярные бренды