background image

Using The Computer

The Function Keys and Numeric Keypad 2 - 19

2

The Function Keys and Numeric Keypad

Function Keys

On the bottom-left of the keyboard is the 

Fn

 key, or Function key. The 

Fn

 key

allows you to change some of the operational features of your computer in-
stantly. Press and hold the 

Fn

 key; then press the appropriate function key

(

Esc

F2

F3

, etc.) located at the top of the keyboard (see 

“The Function

Keys and Numeric Keypad” on page 2 - 19

)

The Numeric Keypad

The keyboard has an embedded numerical keypad for easy numeric data input.
The keypad has a blue typeface. 

To use the embedded keypad simply activate the 

Num Lock

 feature by press-

ing and holding the 

Fn

 key, then pressing the 

Num Lock

 key at the top right

of the keyboard. You may check if 

Num Lock

 is enabled or not by looking at

the LED status indicators (see 

“LED Status Indicators” on page 2 - 7

).

Other Keyboards

If your keyboard is
damaged or you just
want  to  make  a
change, you can use
any standard PS/2 or
USB keyboard. The
system will detect and
enable it automatically.
However special func-
tions/hot-keys unique
to the system’s regular
keyboard may not
work.

Содержание M190S World Warrior






















































































































































Отзывы: