manualshive.com logo in svg

EUROCOM LCD PC, Руководство пользователя, Страница: 124 / 192

Поделиться
Скачать
EUROCOM LCD PC Скачать руководство пользователя страница 124

Interface (Ports & Jacks)

A - 2 Interface (Ports & Jacks)

A

Ports and Jacks

Item

Description

Card Reader Port

The card reader allows you to use some of the latest digital storage cards. Push the card into the
slot and it will appear as a removable device.

DC-In Jack

Plug the supplied AC/DC adapter into this jack to power your computer.

E-SATA Port

Plug external Serial ATA hard drives into this port.

Headphone-Out Jack 

(Green)

Headphones or speakers may be connected through this jack. 

Note

: Set your system’s volume to

a reduced level before connecting to this jack.

Line-In Jack (Blue)

The Line-In jack allows you to play audio sources through the computer’s speakers.

Microphone-In Jack 

(Pink) 

Plug an external microphone in to this jack to record on your computer.

Содержание LCD PC

































































































































































































Отзывы:

Нет отзывов