Euroboor VAC.50S+, Руководство пользователя

Страница: 14 / 34

14
3. Preparatio
n & adjustment
3.1 Assembly
WARNING: To reduce the risk of injury, turn machine off and disconnect from power source
before installing and removing accessories, before adjusting or changing set- ups or when
making repairs. Be sure all switches are in the OFF position. An accidental start-up can cause
injury.
Fitting the feed handles
1. Fit each of the three feed handles by screwing them into the hub in clockwise direction;
2. Tighten firmly by hand.
The handles are supposed to face slightly outward. Be careful not to cross-thread any of the
components.
Mounting the safety guard
The safety guard protects against chippings and accidental contact and must always be mounted
before operation.
1. Hold the guard in front of the magnet, align the slots in the guard with the holes in the
magnet;
2. Fit the screws into the holes located in the side of the magnet.
WARNING:
Always use the safety guard.
Fitting the safety chain
1. Pass the safety chain through the frame grip opening.
2. Wrap the chain around the workpiece.
3. Securely close the chain using the lock.
WARNING:
Always use the safety chain when drilling vertically and/or up-side-down. The
safety chain does not replace the adsorption force of the vacuum drilling machine: it is simply
used to secure against falling in the event of a vacuum pump malfunction.
3.2 Prior to use
Please make sure that the contact surface for the vacuum base is level, clean and greaseless. Remove
any varnish or primer.
Check the machine for possible damage; Before using the machine, you must carefully check the
protective components or slightly damaged components to ensure they are operating perfectly and
as intended. Check that moving parts are in perfect working order, do not jam and check whether the
parts are damaged. All parts must be correctly installed and fulfill all conditions necessary to ensure
perfect operation of the machine. Damaged protective components must be repaired or replaced
according to specifications by EUROBOOR or any authorised EUROBOOR dealer.
DO NOT
use under wet conditions or in presence of flammable liquids or gases.