Euroboor VAC.50S+, Руководство пользователя

Страница: 4 / 34

4
1. Safety
1.1 General safety instructions
Do not use this vacuum drilling machine before you have thoroughly read and completely
understood this manual, specifically the “General safety instructions” and ‘’Specific safety
information’’ , including the figures, specifications, safety regulations and the signs indicating
DANGER, WARNING and CAUTION.
WARNING:
When using electrical tools basic safety precautions should always be followed to
reduce the risk of fire, electric shock and personal injury.
Please also observe the relevant national industrial safety regulations. Non-observance of the safety
instructions can lead to an electric shock, burns and/or severe injuries.
This manual should be kept for later use and enclosed with the machine, should it be passed on or
sold.
Work area
1. Keep your work area clean and well lit. Cluttered and dark work areas increase the chance of
accidents;
2. Do not operate a vacuum drilling machine in explosive atmospheres, such as in the presence
of flammable liquids, gases or dust, the machine may create sparks which could ignite the
dust or fumes;
3. Keep bystanders, children and visitors away while operating a vacuum drilling machine.
Distractions can cause you to lose control.
Electrical safety
1. A machine plug must match the outlet. Never modify the plug in any way. Do not us any
adapter plugs;
2. Avoid body contact with grounded surfaces such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body is grounded;
3. Do not expose the drilling machine to rain or wet conditions. Water entering a machine will
increase the risk of electric shock;
4. Do not abuse the cord. Never use the cord to carry the machine or pull the plug from an
outlet. Keep the cord away from heat, oil, sharp edges or moving parts. Replace damaged
cords immediately. Damaged cords increase the risk of electric shock;
5. When operating a drilling machine, use an extension cord suitable for outdoor use, this
reduces the risk of electric shock;
6. If operating a vacuum drilling machine in a damp location is unavoidable, use a residual
current device (RCD), this reduces the risk of electric shock.