Euroboor RAIL.60S, Руководство пользователя

Страница: 6 / 32

6
Service
1. Tool service must be performed only by qualified repair personnel. Service or maintenance
performed by unqualified personnel could result in risk of injury.
2. When servicing a tool, use only identical replacement parts. Follow instructions in the
maintenance section of this manual. Use of unauthorized parts or failure to follow
maintenance instructions may create a risk of electric shock or injury.
3. Euroboor offers Armature kits containing official Euroboor spare parts suitable for your rail
drilling machine.
1.2 Specific safety information
• Keep your fingers away from the drilling area;
• Avoid touching the slug that is automatically ejected by the pilot pin when the working
procedure is finished. Contact with the slug when it is hot, or if it falls, can cause personal
injuries;
• Do not switch on the machine before checking whether the stand has been tightened firmly
to the mounting surface;
• Adjust the machine so cutter does not extend into the workpiece before drilling. Do not
perform any design, assembly or construction activities on the workpiece while the machine is
switched on;
• Before switching on the machine, make sure all accessories have been mounted correctly;
• Do not switch on the machine until it has been mounted and installed according to all above
mentioned instructions;
• Always use the recommended speed for the accessories and material you are working with;
• Do not use the machine on the same workpiece on which electric welders are working;
• In case of a jammed cutter, turn of the machine, disconnect the machine from the power
supply and then remove the reason for the jam before turning on the machine again.
Residual risk
In spite of following the relevant safety regulations and their implementation, certain residual risks
cannot be avoided.
These are:
•
Impairment of hearing
•
Risk of personal injury from flying particles
•
Risk of burns due to accessories becoming hot during operation
•
Risk of personal injury due to prolonged use.
Always try to reduce these risks as much as possible.