Euroboor RAIL.60S, Руководство пользователя

Страница: 22 / 32

22
7. Trouble shooting
The motor does not work - Damaged or defective wiring
- Carbon brushes are stuck or worn out
- Defective magnet switch
- Defective On / Off switch
- Defective control unit
- Defective armature and/or field
Annular cutters break quickly,
holes are bigger than the annular
cutter - Clearance in the guide
- Bent spindle
- Shaft extending from the motor is bent
- Bent pilot pin
Motor running roughly and/or
seizing up - Bent spindle
- Shaft extending from the motor is bent
- Triangular guide not mounted straight
- Dirt between spindle and triangular guide
Motor starts running when
magnet switch is turned on - Damage or defective relais in control unit
Motor making a rattling sound - Gear ring (bottom of the armature) worn out
- Gear(s) worn out
- No oil in gearbox
Motor humming, big sparks and
motor has no force - Armature damaged (burned)
- Field burned
- Carbon brushes worn out
Motor does not start or fails
- Damaged or defective wiring
- Dirt in sensor control unit
- Damaged or defective (sensor) control unit
- Damage to armature or field coil
- Damaged or defective carbon brushes
Guiding takes a great deal of
effort - Guide is set too tight
- Guide is dry, needs to be greased
- Guide/gear- rack/rotation system dirty or damaged
Frame under voltage - Damaged / defective wiring
- Motor seriously dirty
Fuse blows when magnet switch is
Turned on - Damaged or defective wiring
- Wrong value fuse
- Defective control unit
Fuse blows when motor is started - Damaged or defective wiring
- Wrong value fuse
- Motor running roughly
- Defective armature and / or field
- Carbon brushes worn out
- Defective control unit
Rotation system free stroke too
long - Loose or defective gear rack
- Defective rotation system