Euroboor RAIL.60S, Руководство пользователя

Страница: 17 / 32

17
4.4 Switching motor on and off
The motor unit can only be switched ON when the magnet switch is activated. Although it is a rail
drilling machine, there is a magnet switch. The machine is in fact a converted magnetic drilling
machine. To switch the motor ON, press the green button with marking
“I”. To switch th e motor OFF,
press the red button with marking “O”.
4.5 Motor speed control
The RPM dial allows you to electronically control the speed of the motor (in both clockwise and
counter clockwise direction).
- The indicator of the RPM dial in bottom left corner is minimum speed.
- The indicator of the RPM dial in bottom right corner is maximum speed.
The electronic motor speed control works for both mechanical gears. Be careful not to overturn the
dial.
4.6 Temperature control
This machine is equipped with an all-time electronic temperature protection. If the temperature of
the motor unit runs up to 70 Degree Celsius the motor unit will stop. After a few minutes it can be
started again. When it is possible to start the motor again, let the motor run idle at full speed for a
couple of minutes to let the motor cool down more in an efficient way.