www.euroboor.com
23
5. Maintenance
Your EUROBOOR Air Die Grinder has been designed to operate over a long period of time.
Continuous satisfactory operation depends upon proper tool care and regular cleaning.
WARNING:
To reduce the risk of injury, turn the grinder off and disconnect machine from
the air supply before installing and removing accessories, before adjusting or changing
set-ups or when making repairs. An accidental start-up can cause injury.
Just as every tool with moving parts, your EUROBOOR Air Die Grinder also needs regular
maintenance service. A few recommendations follow:
•
Oil daily
•
Regularly inspect all mountings and screws and ensure they are properly tightened.
Should any of the screws be loose, tighten them immediately. Failure to do so may
result in serious damage.
•
Consult the authorised service agent about the event of failure.
•
Clean the tool after each use.
5.1 Oil daily
The tool should be lubricated daily (or before each use) with air tool oil
(not included). During continuous operation, the tool should be oiled
every 1 to 2 hours. For lubricating the Air Die Grinder EUROBOOR offers
pneumatic oil IBO.80.
For lubricating it is recommended to use 4 to 5 drops of oil in the air
inlet. After which 30 seconds of running is required to distribute the oil
through the tool.
