www.euroboor.com
22
5.
Before working the tool make sure the air flow
adjustment knob is set in the right position. (1 = minimum
speeds, 4 = maximum speed)
6.
Once the air connection is in place and the correct air
flow rate has been chosen, the tool is ready to be
operated. Operating the part can be done by pressing the
trigger-block forward. Once the stigger is pressed air will
make the grinding burr rotate on high speed.
KEEP CLEAR
THE ROTATING GRINDING BURR WITH HANDS, CLOTES,
HAIR OR ANY OTHER LOOSE OBJECTS.
7.
After finishing the workpiece: Disconnect the air supply
and remove the grinding burr to avoid injuries coming
from sharp edges.
WARNING:
excessive pressure exercised on grinder may lead to high working power and
overload. It increases the wear on the rotary burr or other grinding accessory and can
damage the motor of the die grinder.
WARNING:
Sparks generated when grinding metal. Take care that no combustible
material presented on the area of flying sparks.
