EURO ESINF600B, Инструкция по использованию и уходу

Страница: 28 / 40

28
SWITCHING OFF THE HOTPLATE
1 The hotplate must previously be selected. Its
decimal point (4) must be lit up.
2 Using the touch slider key (6) lower the power
to level 0 . The hotplate will switch off.
For quick switch-off: at any power level, by pres-
sing the “ - ” touch key of the touch slider key for at
least 2 seconds, the hotplate will be set to level 0 .
When a hot plate is switched off an H will appe-
ar in its power indicator, if the glass surface of
the related cooking area is hot and there is a risk
of burns. When the temperature drops, the indi-
cator switches off (if the hob is disconnected), or
otherwise a “
- ” will light up if the hob is still con-
nected.
SWITCHING OFF THE DEVICE
The device can be switched off at any time by
pressing the general on/off touch key
(1). In
standby mode an H will appear in the areas that
are hot. The indicators for the rest of the hotpla-
tes will not light up.
The switching off of the device or of each indivi-
dual hotplate will be accompanied by a longer
beep than the rest.
After use, disconnect the device by
using its control and do not rely on the
pot/pan detector.
Locking of the touch keys
of the induction hob
Using the clock/lock touch key (7) you can
lock all the touch keys on the touch control
panel. This will prevent children playing with the
panel or keys from other wise accidentally being
pressed.
Bear in mind that when the touch control is on,
you can still switch it on/off using touch key
(1) even if the lock function is activated (pilot
light 10 is on). On the other hand, if the touch
control is switched off, the locking function does
not allow the on/off touch key
(1) to be used.
You must first deactivate the lock.
To activate or deactivate the function, keep touch
key
(7) pressed for more than 2 seconds. When
the function is activated, the pilot light (10) lights up.
Power Function
(Power concentration)
This function allows the hot plate to be given
extra power, in excess of its nominal power. The
said power depends on the size of the hot plate
and it can reach the maximum value allowed by
the generator.
POWER BOOST FUNCTION CONNECTION
1 Activate the related hotplate to power level 9 .
2
From power level
9
press the “+” of the touch sli-
der key (6) and the indicator will display the P
symbol.
The Power boost function has a maximum dura-
tion of 10 minutes. After this time has elapsed,
the power level will automatically reset to level
9 .
On activating the Power boost function in one
hotplate, it is possible that the performance of
some of the others may be affected, reducing its
power to a lower level, in which case this will be
displayed on its indicator (3).
POWER BOOST FUNCTION
DISCONNECTION
The Power function can be deactivated by pressing
the touch key slider (6) to go back to level
9 .
The function may also automatically be discon-
nected if the temperature of the cooking area
becomes too high.
Timer function
This function makes it easier to cook, as you do
not need to be present throughout the process:
the timed hot plate(s) will switch off automati-
cally after the set time has lapsed. There is a
separate timer for each hot plate, which allows
all of the hot plates to be timed simultaneously.
With these models you can use the clock as a
timer for the hotplates for times ranging from
1
to 99 minutes. All the cooking areas can be pro-
grammed individually and in a simultaneous
manner.
Timing one hotplate
1
The cooking zone to be timed must be selec-
ted. The related decimal point must be lit up.
2 Choose a power level from 1 to 9 for the hot-
plate using the touch slider key (6).
3 Press the clock touch key (7). It is enough
to simply tap it; do not keep it pressed for
more than two seconds or the locking function
will be activated. The time indicator (5) will
display
00 .
4 Immediately afterwards enter a cooking time
of between
1 and 99 minutes, using the touch
slider key (6). It can also be selected by using
the “
+ ” and “ - ” touch keys of the slider (6).
With the first the value will start at 1 , whereas
with the second it will start at 60 . By keeping
the “ - ” touch key pressed for at least 2
seconds, the value will be restored to 00 .