PREPARING THE SERGER FOR
THREADING
Setting Up the Thread Guide Holder
1. The machine is shipped with the thread guide holder
is the lowered position.
2. Hold the top of the thread guide and pull up to fully
extend the thread guide holder. (Fig. 1)
3. The two joints in the telescopic thread guide holder
will click into place when they are correctly
positioned.
4. Center the thread guides above the spools pins.
(Fig. 2)
5. Place the thread over the cone adapters on the
spool pins.
Note: If the machine is threaded, straighten the threads
to prevent tangling.
Fig. 1
Fig. 2
☞
How to Use the Spool Cap
1. When using a regular thread spool, fit the spool
cap supplied with the machine onto the thread
spool as shown in Fig. 3.
Fig. 3
Spool cap
Thread Spool
Press in
12
