FEATURES OF 7-QUART
PROGRAMMABLE SLOW COOKER
3
2.
START BUTTON
The unit will start cooking when
this button is pressed. It will begin
cooking and counting down if a
time was programmed, or it will
begin cooking and counting up if
a time was not programmed.
3.
STOP BUTTON
Pressing this button will stop the
cooking process and put you in
stand-by mode.
5.
TIME DECREASE
Pressing this button will
decrease the cooking time in
30 minute increments.
4.
SETTING BUTTON
Pressing this button will select the
cooking temperature that you
desire: High, Medium, Low or Keep
Warm.
7.
POWER ON LIGHT
This will turn on (red) when
the unit is working.
6.
TIME INCREASE
Pressing this button will increase
the cooking time in 30 minute
increments.
1.
LCD DISPLAY SCREEN
The LCD screen will display the
time, heat setting and cooking or
stand by modes.
4
OPERATING INSTRUCTIONS
This appliance is for HOUSEHOLD USE
ONLY and may be plugged into any
120V AC polarized electrical outlet.
Do not use any other type of outlet
.
Using Your Programmable
Slow Cooker for the First Time
Prior to first use, clean the appliance
thoroughly.
1. Wash the glass lid and the ceramic
pot in hot, soapy water.
2. Rinse and dry thoroughly.
3.
Do not
immerse metal housing in
water.
4. Plug the power cord into a 120 volt
AC outlet.
5. Always cook with the glass lid in
place and the ceramic pot in
position. Remember that frequent
lifting of the glass lid will delay the
cooking time.
6. When cooking a meat and vegetable
combination, place the meat in the
bottom of the ceramic pot.
7. Unplug the slow cooker when the
cooking process is complete. Allow
to cool completely before cleaning.
The ceramic pot cannot withstand
the shock of sudden temperature
changes.
8.
Do not
use frozen meat or poultry in
a slow cooker. Thaw any meat or
poultry before slow cooking.
9. Follow recommended cooking times.
10.
Do not
use the ceramic pot for
storage of foods.
11.
Do not
reheat foods in the slow
cooker.do not set heated unit with
food on a finished wood table.
Always use protective padding under
ceramic pot before setting on table
or countertop.
12.
Do not
use slow cooker to boil
water.
CAUTION:
Be careful when adding
additional liquids to ceramic pot -
Never add cold liquids as this might
cause the ceramic pot to crack.
Always warm the liquids before
adding.
Programming the Slow Cooker
1. Plug the unit in to a polarized
electrical outlet. You will hear one
(1) long beep and the LCD display
screen will light up. It will display
"
P-On
" for one (1) second and then
change to show the initial status
"
STAND_BY
" and default heat
setting "HIGH".
2. Press the "Setting" button and then
press on the timer increase button to
set the cooking time. The time will
increase in thirty (30) minute
increments.
3. Press the setting button once again
to set the cooking temperature
"HIGH, MEDIUM, LOW or KEEP
WARM".
4. Once you have selected the desired
cooking temperature, press on the
"Start" button to begin cooking.
5. The timer will now start counting the
time down to "0".
6. When set cooking time has expired,
the unit will beep once and then go
into Stand-By mode for five (5)
minutes. After the five (5) minutes
have passed it will go into "Keep
Warm" mode for six (6) hours and
then it will automatically turn "Off".
7. To stop the cooking process at any
time during the operation, press on
the "STOP" button and the unit will
go back into "Stand-By" mode
immediately and the "Power On' light
will go off. The timer will be cleared
and only the heat setting will remain.
If you wish to restart the cooking
process, you must reset the timer.
8. If you do not set any time, the unit
will work in a "Count Up" mode to a
maximum of twenty-four (24) hours.
Once this time has passed, it will
beep once and go into Stand-By
mode for five (5) minutes. After the
five (5) minutes have passed it will
automatically go into "Keep Warm"
mode for six (6) hours and then shut
off.
