Euro-Pro 8660, Инструкция по эксплуатации

Страница: 21 / 55

2
1
17
Sujetar la punta del hilo superior con la mano. Girar el
volante hacia adelante hasta que la aguja esté de nuevo en
su posición más alta. (1)
Tirar del hilo superior con lo que se hace subir el hilo inferior
a través del agujero de la placa de la aguja. Llevar los dos
hilos hacia atrás, por debajo del pie. (2)
Bringing up the lower thread/ Subir el hilo inferior
Hold the upper thread with the left hand. Turn the handwheel
towards you with your right hand until the needle goes down
and comes up again to its highest position. (1)
- Lightly draw the needle thread forming a loop with the
bobbin thread. The upper thread should have caught the
lower thread in a loop.
- Pull the needle thread toward you and the lower thread will
come up from the bobbin in a large loop. (2)
Pull about 15 cm. (6") of both thread away from you under
the presser foot.