GB
64
GB
CAUTION: Be care of the top side of new spool is shown as
Fig.13, otherwise the cutting line will not
“
Auto-feed
”
•
Push the spool holder on and fasten it securely.
Fig.12 Fig.13
CAUTION! Under no circumstances wind extra line on the empty spool
but instead replace it with a new one, the same as the original.
The use
of line with different characteristics to those of the original can permanently damage the grass
trimmer as well as annulling the terms of the guarantee.
MAINTENANCE
Before carrying out any maintenance operations, cut off the electric power supply by
disconnecting the plug from the extension cable.
•
Regular cleaning and maintenance of you grass trimmer will ensure efficiency and prolong
the life of your machine.
•
After each cutting operation, take apart and clean out the grass and soil from; the spool
and its slot, the whole trimmer and in particular the guard.
•
During operation, keep the air slots clean and free of grass.
•
Only use a cloth soaked with hot water and a soft brush to clean the grass trimmer.
•
Do not spray or wet the appliance with water.
•
Do not use detergents or solvents as these could ruin the trimmer. The parts in plastic can
easily be damaged by chemical agents.
•
If the line cutting blade no longer cuts or breaks, have this replaced by contacting an
authorized service center.
CAUTION! The blade can give deep cuts.
•
For repairs which have not been explained in these instructions, contact an authorized
service center.
TROUBLE-SHOOTING
CAUTION! Before every operation disconnect the electric
power supply.
•
If the grass trimmer vibrates: remove the spool and clean its slot carefully removing any
grass and so forth. If vibration persists after reassembly, replace the spool with a new one.
