GB
62
GB
Note
: In order to avoid detaching the electrical cable, always check that it is firmly attached
to the cable holder before using the trimmer.
1) Make a loop with the extension cord (not delivered) and push it into the hole located on
bottom of the handle.
2) Place the loop of cable over the end of the cable holder (3) and make sure that it is
pulled tight enough to prevent it coming loose when you use the trimmer (Fig. 9).
Fig. 9
Auto-feeding nylon line
If the nylon line is too short when you start the equipment for the first time, please turn off
and on several times, the line will be cut to the perfect length automatically.
OPERATION
Before starting
Before use, check that the tool is in good working order and that the length of the trimmer
line is correct, as follows:
1. Ensure the switch is in the off position and disconnect the cable plug from the mains
supply.
2. Examine the general condition of the tool. Inspect the guard, switch, cord set and
extension cord, check for loose screws, improper mounting, broken parts and any other
condition that may affect its safe operation. If abnormal noise or vibration occurs during
operation, turn the line trimmer off immediately and have the problem corrected by a
qualified repair person.
3. Ensure that you are on a flat surface and have secure footing.
4. Check that the line touches or goes beyond the edge of the guard.
Instructions for Use
After reading the safety rules carefully, follow the instructions below attentively in order to
get the most out of your grass trimmer.
Start off slowly, when you have gained experience, you will be able to use the grass trimmer
to its full potential.
•
To start the trimmer, first press the lock-off button (2), whilst holding the lock-off button,
press the On/Off switch (1). To stop the appliance, simply release the On/Off switch (1).
(Fig.1)
