40
EN
TROUBLESHOOTING
WARNING!
Only perform the steps described within these instructions. All further inspection,
maintenance and repair work must be performed by an authorized service centre or
a similarly qualified specialist if you cannot solve the problem yourself. Suspected
malfunctions are often due to causes that the users can fix themselves. Therefore, check
the appliance using this section. In most cases the problem can be solved quickly.
Problem
Possible cause
Solution
The triimer does not start
Battery pack not properly
attached
Attach properly
Battery pack discharged
Remove and charge the
battery pack
Battery pack damaged
Check by a specialist
electrician
Other electrical defect to
the appliance
Check by a specialist
electrician
The trimmer does not reach
full power
Battery pack capacity too
low
Remove and charge the
battery pack
Unsatisfactory result
Trimmer line is worn
Replace with a new one
Timmer spool /lines not
suitable for intended
operation
Use suitable accessory
Product suddenly stops
Appliance overloaded
Remove the trimmer from
the working surface and
switch it on again
Battery pack (19)
discharged
Remove and charge the
battery pack
Battery pack (19) is too hot Remove the battery pack
and let it cool down
Excessive vibration or noise Accessory is dull/damage
Replace with a new one