Eureka Customer Service HELPLINE 1-800-282-2886
12
How to maintain brushroll
C A U T I O N
Make sure vacuum cleaner is
turned off and power cord is
unplugged.
Grasp brushroll bottom plate at top and pull
down to remove.
To replace bottom plate, align 6 tabs with slots and
press each firmly to snap on. Use coin to turn slots
clockwise to ‘lock’ position.
Step on handle release to lower handle. Turn
vacuum face down on floor. Use scissors to clip
heavy threads or strings.
If brushroll light turns red, this indicates the brushroll is clogged
and cannot turn. Brushroll will automatically shut off until clog is
removed and vacuum is returned to upright position.
If debris cannot be removed easily, remove bottom
plate for greater access to brushroll. Using flat-head
screwdriver or coin, turn 3 slots counterclockwise a
quarter turn to ‘unlock’ position.
To avoid unnecessary service calls, periodically check brushroll for debris.
02155560_WMT_rev1_final.qxp_English 6/30/17 5:24 PM Page 12
