9
How to maintain your vacuum cleaner
CAUTION
Never operate vacuum
cleaner without all filters,
filter screen and dust cup
in proper position.
WARNING:
Moving parts!
Recharge cleaner after
each use.
Washable post-motor filter – clean every 6 months
Washable dust cup filter – clean monthly
Washable brushroll – clean frequently
Dust cup – Empty after each use
Place motorized floor nozzle upside down. Use fingers
to remove clog or debris. Do not use scissors or knife
to cut strings and threads.
If debris cannot be removed easily, remove retainer
clip to access brushroll. Using flathead screwdriver
or coin, turn screw to the ‘unlock’ position.
To reassemble:
1. Align one end of brushroll with floor nozzle gear.
2. Press other end into slot.
3. Hook retainer clip under tab and press down.
4. Insert screw and turn to ‘lock’ position.
Remove retainer clip and lift out brushroll to clean
and remove debris. Brushroll is washable. Roll in a
towel to absorb water; dry THOROUGHLY before
reassembling.
Hold over wastebasket and
push lever to release bottom
lid. Debris will empty.
Or, remove dust cup by twisting to ‘unlock’
position. Empty debris. Reattach dust cup
and twist to ‘lock' position.
1. Twist dust cup and remove.
2. Twist filter screen and remove.
3. Lift out foam filter and holder.
4. Rinse and dry THOROUGHLY.
5. Place foam filter and holder
in filter screen.
6. Twist filter screen to 'lock.'
7. Reattach dust cup and twist
to ‘lock.’
24h
24h
24h
www.eureka.com
OR
1. Twist filter cover and remove.
2. Lift out post-motor filter.
3. Shake to remove dust.
4. Every 6 months, replace filter or rinse and dry THOROUGHLY.
5. Reposition filter and cover and twist to ‘lock.’
NEC120_02155120_WMT_rev1.qxp_Layout 1 12/11/17 11:17 AM Page 9