- 10 -
Installation Procedure of
Model : Aquaguard
®
Universa 80SC
The Universa 80SC is a standalone with floor installation, Discuss with the customer and
finalizes the place for install the unit. The preferable place is to position the product is
somewhere near to the drain point and closure to the electrical socket. Then follow the
below procedure for installation:
Diverter valve fixing:
1. Close the input source valve for the water pipe line where the purifier is planned to
be installed.
2.
Remove the existing tap from location where the unit is planned to be installed.
3.
Connect the Diverter valve to the point and fix the existing tap to the Diverter valve.
4.
Check for water leakage from the joints.
Flushing the unit:
1.
Make the product to standalone on the platform with the help of leg bush.
2.
Connect the other end of the PL8 tube white (connected to the diverter valve) to the
inlet of the product & Remove the Flush port dummy plug from the bottom.
3.
Connect the PL4 tube blue to the Flush port of the product and leave the other end
into drain.
CAUTION: Sediment Filter & Carbon Cartridge should be flush for minimum of 5 to 10
minutes before connection to the unit.
4.
After flushing close the DV & remove the all the tubes form the inlet & flush port, the
replace the dummy plug in the flush port.
Ø
Connect the PL8 white color tube to the quick connector which is fixed on the
diverter
valve.
Ø
Connect the other end of the PL8 tube to the inlet port of the purifier.
Ø
Connect the blue colour tube to the drain port and place the other end of the tube in
to the drain point where draining facility is available. Ensure that the tube does not
come out from the drain point.
