8
RECOMMENDED PROCEDURE FOR WATER TESTING
Collection:
1.
2.
3.
Water should be collected in a sterile container impervious to light (min. quantity 125 ml).
The container should be maintained at 4o C to 10o C during transportation.
Water should be transported within one hour and tested in the next two hour of
sampling (i.e. analyzed within 3 hours of sampling).
Detailed procedures to be followed are as per “Standard Methods for Examination of
Water & Wastewater”-1985 16th Edition, prepared & published by the American Public
Health Association, USA (Pages 860-901).
Water testing, if any, shall be done as per procedure specified in the User Manual and
comparison, if any shall be done only against W.H.O. standards as specified in the User
Manual.
Documents pertaining to the efficacy of ultraviolet light in water purification system are
available at Eureka-Forbes Office.
NOTE:
Modification in the production may be introduced from time to time and consequently the
details given in this manual are subject to alteration without pervious notice.
RECOMMENDED TESTS FOR WATER ANALYSIS
Water should be tested for:
1.
2.
Total plate count by membrane filtration technique.
Total coliform count.
Eureka Forbes Water Purification System
