Euphonix R-1 Digital Multitrack, Руководство по эксплуатации

Страница: 53 / 54

Euphonix Version 3 Supplement to the R-1 Operation Manual Editing and Selection Features
53
5.3.3 Selection Info (with more than one track selected)
Table 5-3 Selection Info
Parameter
Name
Meaning Editable Comments and Constraints
Start Time
The time position at
which the selection
area starts
Yes
This value is retained (and displayed) even
when it is not being used (i.e. it is disabled).
If Start Time is disabled then the Start Time
is automatically set to zero.
Use the Store Start (Enable) key to quickly
enter this value at the current position, then
use this Info Panel to precisely adjust the
Start Time in small increments.
Start Time
Enable
The on/off (enabled/
disabled) status of a
selection start time
other than Zero.
Switchable
When the Start Time is off the selection area
automatically starts at zero.
With both Start and End Times disabled the
entire Track is selected.
Use Wave + (Store) Start Enable key to tog-
gle the Start Time status from enabled to dis-
abled and vice versa.
End Time
The time position at
which the selection
area ends
Yes
This value is retained (and displayed) even
when it is not being used (i.e. it is disabled).
If End Time is disabled then the End Time is
automatically set to 24:00.
Use the Store End (Enable) key to quickly
enter this value at the current position, then
use this Info Panel to precisely adjust the
End Time in small increments.
End Time
Enable
The on/off
(enabled/disabled)
status of a selection
end time other than
24:00.
Yes
When the Selection Start Time is off the
selection area automatically starts at zero.
With both Start and End Times disabled the
entire Track is selected.
Use Wave + (Store) Start Enable key to tog-
gle the Selection Start Time status from
enabled to disabled and vice versa.
Selection
Length
The length of time
from the Selection
Start point to the
Selection End point.
Yes
Editing this parameter changes the Selection
End Point.
If Selection End point is disabled then the
Selection End point will be modified, but the
actual selection area will not be changed.
Tracks
Selected
The number of Tracks
with the Selection
region.
Adjustable
elsewhere
This number primarily for informational pur-
poses and changes according to Track
selection operations happening outside of
the Selection Info panel.