Euphonix Version 3 Supplement to the R-1 Operation Manual
Editing and Selection Features
47
5.2.2
Wireframe Selection
The trackball pointer can select regions of Track time.
1.
Click on any empty track area.
2.
Hold down the trackball left-button and drag the cursor over the Track Sheet.
A rectangular selection grows from that point.
3.
Up or down motion of the dragging cursor adds or removes Tracks from the
selection area. Left or right motion adds and subtracts time.
The resulting selection area will be over a contiguous Track and time range.
4.
Add discontinuous Tracks to the selection by clicking on the Track names
while holding down the keyboard
Ctrl
key.
The selection start and end points will not change when adding new Tracks to the
selection.
If you cannot click on empty track area, hold down the keyboard
Alt
key and click di-
rectly on a Clip. The wireframe begins on top of the Clip at the time of the cursor location.
Figure 5-4
Wireframe Selection
5.2.3
Selecting Everything
As documented on page 264 of the main
R-1 Operation Manual
, press
Wave+Se-
lect(Enable)All
on the Remote to Select All Tracks. With version 3, Select All Tracks
and Select All Time are also offered in popup menus.
