Euphonix Version 3 Supplement to the R-1 Operation Manual
Overview of Version 3
12
Routing
Figure 1-2
Router App: Routing Dialog
You can make individual channel patches/routes by selecting the
Routing
tab.
Route Width
, at the bottom of the window, sets the number of contiguous channels
selected. For example, if your Route Width is four and you select channel 1, channels
1–4 are all selected for routing.
To change a patch or route, select a channel under one of the MADI devices in
Devices
Generating MADI signals
. For example:
1.
Click on the + next to Analog to MADI (AM 713) #1 and select Output
Channel #1.
2.
Under
Devices receiving MADI Signals
, click the + next to Audio deck #1 and
select Input Channel #2.
3.
Now click on the
Route Selections
button at the bottom of the dialog.
This routes channel 1 from your AM 713 #1 to channel 2 of your Audio Deck #1.
You can then save this new route as a new Patch as described in the Patches section below.
