INSTALLING THE WATER BOTTLE
08
1.Make sure the lower door is open.Open the lower door by pull-
ing on the right side of the door.Note: the lowerdoor is covered by
a thin layer of plastic film used to protect the door during ship-
ment.Please remove the plasticlayer prior to first use.
2.Place fresh water bottle outsie of the bottle storage area.
3.Clean outside of new bottle with a cloth.
4.Remove the entire plastic cap and paper seal from the top of a
brand new water bottle.
5.Bend the water straw. See the pic below.
6.Place the water straw into the water bottle, lower the straw to
the bottom of the bottle and clasp the bottlecap down onto the
neck of the water bottle so that the bottle cap is tightly secured to
the bottle.
7.Make sure the weighted end of the water straw reaches the
lowest part of the water bottle. See fig.3 Note: thismethod is for
3-5 gallon water bottles. Most standard shaped water bottles have
a raised center at the very bottom.For maxium efficiency, make
sure the water straw reaches the side of the bottle at its lowest
point to ensure all of thewater can be utilizied. See fig.3
8. Silde bottle into the storage area and close the lower door.
Make sure that the door is closed tightly.