16
6.5 REMOVING THE CHARGER
Disconnect the charger from the mains power supply.
Disconnect the pole callipers from the battery, fi rst minus then plus.
Allow the battery to cool down.
Only for open batteries:
Fill the cells with distilled water up to the level specifi ed by the battery manufacturer.
Close the battery cells with the stoppers.
First pull the plug out of the socket and observe the sequence for disconnection. This prevents sparks from
forming. Since charging generates a detonating gas, this is particularly important for the sake of your
safety.
CAUTION
7. MAINTENANCE AND CARE
7.1 MAINTENANCE
If used correctly, the device is maintenance-free.
Clean the pole callipers every time the charging procedure is completed. Remove all splashed battery acid from the
pole callipers to prevent corrosion. Clean the device carefully with a dry cloth. Do not use liquids or chemical cleaning
agents. Never submerge the device in liquids. Never allow liquid to fl ow over the device.
Before storing the device, roll up the cables properly using the designated hook in order to prevent damages to the
cables and device. Store the device in a clean and dry place.
7.2 CARE
8. NOTES REGARDING ENVIRONMENTAL PROTECTION
9. CONTACT INFORMATION
The packaging is made up of environmentally friendly materials which may be disposed of via your local
recycling points. Do not put electrical devices into the household waste. Electronic and electrical devices
must be collected separately and sent for environmentally friendly recycling. Contact your community or
town administration for information regarding the disposal of electrics.
EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal, Germany
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
[email protected]
www.eal-vertrieb.com
