5
6. OPERATING INSTRUCTIONS
6.1 OVERVIEW
Before connecting a device to the double socket, fi nd out from
the manufacturer of the device what its current consumption
is. You can also fi nd this information in the manual or on the
type plate.
The double socket does not have its own fuse.
1 Car plug
2 Connection cable
3 12 V car socket
4 USB output 2.1 A
5 USB output 1 A
6.2 OPERATION
Only use the double socket while driving or when the engine
is running, otherwise your vehicle‘s battery will be discharged.
Plug the car plug (position 1 in the overview) into the 12 V on-board socket
of your vehicle. The 12 V vehicle sockets (position 3 in the overview) are
now illuminated.
On some vehicles, the ignition must be switched on in order
for the on-board socket to be supplied with voltage.
The double socket is now ready for use.
The total power of the connected units must not exceed
100 W.
After parking the vehicle, remove the vehicle plug of the
double socket from the on-board socket again, otherwise the
battery of your vehicle will be discharged.
The double socket is maintenance-free when used as intended.
Clean the unit only with a soft, dry cloth. Do not use any liquids or chemical
cleaning agents. Never immerse the unit in liquids. Never allow liquids to
run into the appliance.
7. MAINTENANCE AND CARE
Do not put electrical devices into the household waste.
Electronic and electrical devices must be collected separa-
tely and sent for environmentally friendly recycling. Contact
your community or town administration for information
regarding the disposal of electrics.
8. NOTES FOR ENVIRONMENTAL PROTECTION
9. CONTACT INFORMATION
EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal,
Germany
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
[email protected]
www.eal-vertrieb.com
