3-19
Legend
Description
Set Auxiliary function
；
On or OFF
Set tolerance mode
；
Per
（
percent tolerance
）
or Abs
（
Absolute tolerance
）
Set nominal value of primary parameter
Set the low limit value of P1
Set the high limit value of P1
Set the low limit value of P2
Set the high limit value of P2
Set the low limit value of P3
Set the high limit value of P3
Set the low limit value of secondary parameter
Set the high limit value of secondary parameter
Perform the following steps to set the high/low limits:
1. Press
SHIFT
key to enable the secondary function. “
” will be displayed on the LCD.
2. Press LIMITS key, the Auxiliary status will be displayed as shown in figure 3.7.
3. If no change is required with the previous Auxiliary status, press
[
▲
]
or
[
▼
]
key to
select another limit you want to modify. Press
[ENTER]
key to enter the data input
status, “OFF” will be flashing in the primary parameter display area.
4. Press
[
▲
]
or
[
▼
]
key to open Auxiliary function.
5. Press
[
ESC
] key to return to the main menu without changing the previous value of the
limits.