EUCHNER EKS FSA Series Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 34

EUCHNER EKS FSA Series Скачать руководство пользователя страница 4

Manual EKS Electronic-Key Adapter USB

Page 4/34

Subject to technical modifications

2094485-05-07/19

1 General notes

1.1 Use of the manual

This manual describes the technical features and the function of the EKS USB read/write stations listed below
(also referred to as “devices” for short in the rest of the text). The complete evaluation and interface electronics
for data transmission are accommodated in these units.



Compact Electronic-Key adapter in G01 housing EKS-A-IUX-G01-ST01 (order no. 092750)

with USB interface



Compact Electronic-Key adapter in G01 housing EKS-A-IUXA-G01-ST01/04 (order no. 098513)

with USB interface version

FSA

(

F

or

S

afety

A

pplications)



Compact Electronic-Key adapter in G30 housing EKS-A-IUX-G30-STBM (order no. 157195)

with USB interface

1.1.1 Explanation of symbols

The following symbols are used in this manual to identify important instructions and useful information:

Danger!

Identifies an immediate hazard. If not avoided, the consequence will be fatality or very serious injuries.

Warning!

Identifies a possible hazard. If not avoided, the consequence may be fatality or very serious injuries.

Caution!

Identifies a possible hazard. If not avoided, minor injuries or damage may result.

Attention!

Risk of damage to material or machine or degradation of function.

Information!

Important information is provided to the user here.

«
...
2
3
4
5
6
...
»

Содержание EKS FSA Series



































Отзывы:

Нет отзывов