EUCHNER EKS FSA Series Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 34

EUCHNER EKS FSA Series Скачать руководство пользователя страница 18

Manual EKS Electronic-Key Adapter USB

Page 18/34

Subject to technical modifications

2094485-05-07/19

7 Setup

Perform setup in the following sequence:

1. Set the DIP switches on the Electronic-Key adapter

(see chapter 4.4 DIP switch setting).

2. Check whether mounting and electrical connection are correct (see chapter 5 Mounting and chapter 6

Electrical connection).

3. After the USB connecting cable is plugged in and the EKS USB drivers are installed, the LED on the front of

the Electronic-Key adapter illuminates green. This indicates that the power supply is present.

4. Place the Electronic-Key in the Electronic-Key adapter. The LED changes to yellow.

5. Important: for the version EKS

FSA

, all safety functions must also be thoroughly tested.

7.1 Installation of EKS USB drivers

The EKS USB drivers provided are certified by Microsoft (Windows Hardware Quality Labs / WHQL) and
digitally signed. These drivers are therefore distributed via Windows updates and the Microsoft Update Catalog.

Please proceed as follows if the EKS USB drivers do not install themselves automatically:

To begin installation, have the driver software (order no. 094376) at hand in a folder or on a data carrier. The
driver software is available for download on the Internet at

www.euchner.com

or free of charge on request.

Information!

The user must be logged on as an administrator in order to install or uninstall the drivers.

If an Internet connection and administrator rights are available when a
read/write station is connected to a Windows PC, the drivers will
automatically install themselves in the background.

You will be notified as soon as automatic installation is complete.

«
...
16
17
18
19
20
...
»

Содержание EKS FSA Series



































Отзывы:

Нет отзывов