EUCHNER CTP-AR Multicode Скачать руководство пользователя страница 11

Страница: 11 / 48

2123041-08-01/21 (translation of the original operating instructions)

Operating Instructions

Transponder-Coded Safety Switch CTP-AR

7. Manual release

Important!

S2
S3

No further release functions can be retrofitted on Extended variants with control elements in position

1 (S1) and position 2 (S2).

Some situations require the guard locking to be released manually (e.g. malfunctions or an emergency). A function test

should be performed after release.
More information on this topic can be found in the standard EN ISO 14119:2013, section 5.7.5.1. The device can feature

the following release functions:

7.1.

Auxiliary release and auxiliary key release

In the event of malfunctions, the guard locking can be released with the auxiliary release or the auxiliary key release irre-

spective of the state of the solenoid.
The safety outputs are switched off when the auxiliary release is actuated. Use the safety outputs

to generate a stop

command.
The monitoring output OL is switched off; OD can assume an undefined state. Open the guard and close it again after re-

setting the auxiliary release or auxiliary key release. The device will then operate normally again.

Important!

The actuator must not be under tensile stress during manual release.

After use, reset the auxiliary release and screw in and seal the locking

screw (e.g. with sealing lacquer).

The auxiliary key release must not be used to lock the switch during

servicing to prevent activation of guard locking, for example.

Loss of the release function due to mounting errors or damage during

mounting.

Check the release function every time after mounting.

Please observe the notes on any enclosed data sheets.

7.1.1. Actuating auxiliary release

1. Unscrew locking screw.
2. Using a screwdriver, turn the auxiliary release to in the direction of the arrow.

Guard locking is released.

7.1.2. Actuating auxiliary key release

On devices with auxiliary key release (can be retrofitted), simply turn the key to release. Function as for auxiliary release.

For mounting, see the auxiliary key release supplement.

Auxiliary

release

Locking screw

Содержание CTP-AR Multicode

















































Результаты поиска

Содержание CTP-AR Multicode

Отзывы:

Похожие инструкции для CTP-AR Multicode

Бренды по названию

Популярные бренды

EUCHNER CTP-AR Multicode, Руководство по эксплуатации

Результаты поиска

Содержание CTP-AR Multicode

Отзывы:

Похожие инструкции для CTP-AR Multicode

Бренды по названию

Популярные бренды