EUCHNER CES-A-AEA-02B Скачать руководство пользователя страница 7

Страница: 7 / 44

2084606-19-09/17 (translation of the original operating instructions)

Operating Instructions

Non-Contact Safety System CES-A-AEA-02B/CES-A-AEA-04B

4. Exclusion of liability and warranty

In case of failure to comply with the conditions for correct use stated above, or if the safety instructions are not followed,

or if any servicing is not performed as required, liability will be excluded and the warranty void.

5. General safety instructions

WARNING

Danger to life due to improper installation or due to bypassing (tampering). Safety components fulfill

a personal protection function.

Safety components must not be bypassed, turned away, removed or otherwise rendered ineffec-

tive. On this topic pay attention in particular to the measures for reducing the possibility of bypass-

ing according to EN ISO 14119:2013, section 7.

The switching operation must be triggered only by actuators designated for this purpose.

Mounting, electrical connection and setup only by authorized personnel possessing the following

knowledge:

-specialist knowledge in handling safety components

-knowledge about the applicable EMC regulations

-knowledge about the applicable regulations on occupational safety and accident prevention.

The number of teach-in and switching operations is saved in the internal memory of the evaluation

unit. If necessary, this memory can be read by the manufacturer.

Important!

Prior to use, read the operating instructions and keep these in a safe place. Ensure the operating

instructions are always available during mounting, setup and servicing. EUCHNER cannot provide any

warranty in relation to the readability of the CD for the storage period required. For this reason you

should archive a printed copy of the operating instructions. You can download the operating instruc-

tions from www.euchner.com.

Содержание CES-A-AEA-02B













































Результаты поиска

Содержание CES-A-AEA-02B

Отзывы:

Похожие инструкции для CES-A-AEA-02B

Бренды по названию

Популярные бренды

EUCHNER CES-A-AEA-02B, Руководство по эксплуатации

Результаты поиска

Содержание CES-A-AEA-02B

Отзывы:

Похожие инструкции для CES-A-AEA-02B

Бренды по названию

Популярные бренды