EUCHNER 105283 Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 42

EUCHNER 105283 Скачать руководство пользователя страница 10

Operating Instructions Safety Systems
MGB-L..B-PN.-… (PROFINET) and With Data Structure Type A

10

(translation of the original operating instructions) 2114575-06-02/21

6. Function

6.1.

Interlocking module MGB-L0.B-PN.

Together with a handle module, the interlocking module makes it possible to interlock movable guards. The combination

also serves as a mechanical door stop at the same time.
The following switch-on condition applies to safety bit

SI 9

(SK):

Ì

Guard closed (T)

Ì

Bolt tongue inserted into interlocking module (R)

See also chapter

17. System status table on page 33

and chapter

14.8. PROFIsafe data bytes (data block for safe

functions) on page 30

.

The interlocking module detects the position of the guard and the position of the bolt tongue.
The bolt tongue in the handle module is moved into and out of the interlocking module by actuating the door handle.

6.2.

Locking module MGB-L1.B-PN. and MGB-L2.B-PN.

Together with a handle module, the locking module makes it possible to lock movable guards. The combination also serves

as a mechanical door stop at the same time.

Important!

To operate the device as guard locking for personnel protection according to EN ISO 14119, the

signals for door position (T=PROFIsafe bit

SI 3

), bolt position (R= PROFIsafe bit

SI 4

) and guard

lock monitoring (Z= PROFIsafe bit

SI 5

) must be polled in a logical AND operator. This operator is

already implemented in the PROFIsafe data block (ÜK= safety bit

SI 10

).

As an alternative, you can also link the bits

SI 3

to

SI 5

individually in your control system.

The following switch-on condition applies to safety bit

SI 10

(ÜK):

Ì

Guard closed (T)

Ì

Bolt tongue inserted into locking module (R)

Ì

Locking arm in locking position (guard lock monitoring) (Z)

See also chapter

17. System status table on page 33

14.8. PROFIsafe data bytes (data block for safe

functions) on page 30

.

The locking module detects the position of the guard and the position of the bolt tongue. The position of the locking arm

is also monitored.
The bolt tongue in the handle module is moved into and out of the locking module by actuating the door handle.
When the bolt tongue is fully inserted into the locking module, the locking arm locks the bolt tongue in this position. Depending

on version, this locking is by spring force or solenoid force.

«
...
8
9
10
11
12
...
»

Содержание 105283











































Отзывы:

Нет отзывов