250-400
ETT Distribution GmbH Schmalbachstraße 16 38112 Braunschweig
Nachdruck oder Vervielfältigung nur mit ausdrücklicher Genehmigung
Exchanging the Stylus or the Headshell:
The stylus can easily pulled off from the headshell [8].
The wires of the headshell [8] are attached like this white = left c, blue = left channel -, red =
right c and geen = right channel -.
For removing the headshell [8] from the pick-up arm [10] unlock the headshell locking nut [9].
Operation:
Connect the audio connectors [22] to a mixer or an amplifier.
Connect the record player with [24] to an electric outlet and switch it on with [25].
Playback of a record:
Put [19] to PH. The corresponding LED will show.
Remove any dust from the turntable.
Put the record of your desire on the turntable. For records requiring a rotation speed of 45 Rpm do not
forget to use the adapter [11].
Adjust the required rotation speed: Press [5] only = 33 rpm, press [6] only = 45 rpm or press [5] & [6]
together = 78 rpm.
Release the pick-up arm [10] from its fastening.
Use the lever [12] then the pick-up arm [10] will be lifted mechanically.
Place the headshell [8] above the first track of the record.
Use the lever [12] again and the pick-up arm [10] is declining onto the record which will be played back
by pressing [1].
After the playback is completed the pick-up arm will return to its bracket automatically.
Should the playback be aborted before press [1] and the pick-up arm will return to its bracket while the
turntable stops rotating.
In every case fasten the pick-up arm [8] again after finished using the device.
Playback of titles from storage medium (USB-stick, SD-card):
Put [19] to USB or SD. The corresponding LED will show.
Insert a SD-card or a USB-stick in [3].
Start or stop the playback with [16].
With [17] it is possible to address a title directly.
