26868-01A
19
(Operation while connected to a T-Max® remote
system. If using other remotes or no remote sys-
tem, see previous page.)
1.
Lift the canopy, lie down on the bench
(face up), lower the canopy using the
canopy handle. For best results, position
the canopy as close to your body as pos-
sible, maintaining at least 3” (7.6 cen-
timeters) from your body and 4” (10.2
centimeters) from your face.
2.
Put on your safety goggles.
3.
Assuming the remote system has been set
to allow a pre-tanning delay time, the timer
display (D) will repeatedly flash the delay
symbol “dL” and then the remaining delay
time. Press the timer button (F) or wait until
the delay time has expired to begin the tan-
ning session. The lamps will turn on and
the timer will begin to count down.
4.
When the timer reaches “0” the lamps turn
off. If you want to stop your session before
time expires, press the stop button (E).
5.
Raise the canopy by using the outer edge
of the canopy, do not push up on the
acrylic shield. The cooling fans run for a
period of time after the lamps shut off to
aid in cooling the sunbed. The timer will
indicate “..” as a reminder to clean the
sunbed. After the sunbed is cleaned press
the timer button and the display will
return to “0”.
Operation - Using Your Sunbed
Содержание SunStar 332
Страница 1: ...26868 01A...
Страница 32: ...26868 01A P 332ST 3F...
Страница 33: ...26868 01A Ballast Tray...
