26868-01A
18
Operation - Using Your Sunbed
Using Your Sunbed
A Face tanner control
- Turns face tanners
on and off during use. (Units equipped
with face tanner only)
B Body fan control
- Controls the speed of
the body fan during use.
C Body fan speed indicator
- Indicates
speed of fan. (OFF - LOW - MED -
HIGH)
D Timer display
- Displays remaining time.
E Stop button
- Interrupts tanning session.
F Timer button
- Turns bed on. Timer dis-
play shows remaining time. If a lesser
time is desired, press timer button until
desired time is displayed.
A
B
C
D
E
F
WARNING
Wear protective eyewear.
Failure to may result in severe burns or
longterm injury to the eyes.
(Operation as a stand-alone unit or connected to
a remote system using a control relay. If using T-
Max® see next page.)
1. Lift the canopy, lie down on the bench
(face up), lower the canopy using the
canopy handle. For best results, position
the canopy as close to your body as pos-
sible, maintaining at least 3” (7.6 cen-
timeters) from your body and 4” (10.2
centimeters) from your face.
2.
Put on your safety goggles.
3.
Press the timer button (F,
see left
) to begin
the tanning session. The lamps will turn on
and the timer will begin to count down.
4.
When the timer reaches “0” the lamps
turn off. If you want to stop your session
before time expires, press the stop button
(E). You will have ten seconds to restart
with the remaining time, otherwise the
timer will reset to “0”.
5.
Raise the canopy by using the outer edge
of the canopy, do not push up on the
acrylic shield. The cooling fans run for a
period of time after the lamps shut off to
aid in cooling the sunbed.
Содержание SunStar 332
Страница 1: ...26868 01A...
Страница 32: ...26868 01A P 332ST 3F...
Страница 33: ...26868 01A Ballast Tray...
